Tag Archives: Turbosound

Turbosound Steel Wall Bracket For Iq15 …

Turbosound Steel Wall Bracket For Iq15  ...Turbosound – Turbosound Steel Wall Bracket For Iq15 Loudspeakers
The iQ12-WB is a matte black, powder coated wall bracket specifically designed to hang the iQ12 in standalone applications, such as wall or ceiling mounting in bars or clubs, or as an under-balcony fill. The iQ15-WB consists of two yoke spacers, two yoke brackets and a bracket spacer, plus all the fasteners required for assembly. After the iQ15 is securely mounted and adjusted for the desired coverage, the screws attaching the enclosure to the bracket should be fully tightened to finalize the installation.Steel wall bracket for iQ15 loudspeakersMounts one speaker horizontally or vertically to a wallAdjustable angle for optimum audience coverageHard wearing semi matt black powder coat finish
Turbosound, Monitor & Speaker Brackets IQ15WB

Turbosound Madrid Tms122m 12″ Full Range …

Turbosound Madrid Tms122m 12Turbosound – Turbosound Madrid Tms122m 12″ Full Range Loudspeaker
The 2-way full-range TMS122M is a switchable passive/bi-amp 12″ 3200 Watt loudspeaker system that is suited for a wide range of portable speech and music sound reinforcement applications. The TMS122M is designed to work in conjunction with TURBOSOUND loudspeaker management systems, providing optimal performance for FOH, side fill and floor monitor applications, as well as offering considerable flexibility to readily adapt to varying venue requirements. The TMS122M loudspeaker features a carbon fiber loaded 12″ low frequency driver with inside/outside wound coil with low mass voice coil for improved transient response, and a titanium dome 1.4″ neodymium motor compression driver mounted on a 90 horizontal by 50 vertical low distortion waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. Finished in a highly durable semi matte black paint, the cabinet is constructed from 15 mm (58″) birch plywood, and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. The TMS122M includes internal M10 threaded rigging points for permanent installation, a dual-angle pole mount socket for high or low height use with 35 mm poles/speaker stands to optimize audience coverage, and durable handles for easy transport. The dual angle wedge shape design also enables the TMS122M to be utilized in low profile stage monitor applications where improved audience line of sight is of paramount importance. Two Neutrik speakON* NL4 connectors are provided for input and link connections to additional enclosures.2 way full range loudspeaker for portable PA and installation applications800 Watts continuous, 3,200 Watts peak powerIdeal for FOH, side and drum fill applicationsCarbon fibre loaded 12″ low frequency driver with inside/outside wound coilTitanium dome 1.4″ neodymium motor compression driver

Turbosound Venue Tv152 2-Way 15″ Full Range …

Turbosound Venue Tv152 2-Way 15Turbosound – Turbosound Venue Tv152 2-Way 15″ Full Range Loudspeaker
The two-way full range TVX152 is a switchable passive/bi-amp 15″ 2,000 Watt loudspeaker system designed for a wide range of portable speech and music sound reinforcement applications. The TVX152 is designed to work in conjunction with TURBOSOUND loudspeaker management systems, providing optimal performance for FOH, side and drum fill applications, as well as offering considerable flexibility to adapt to venue requirements.The TVX152 loudspeaker features a carbon fiber-loaded 15″ low frequency driver with inside/outside wound coil with low mass voice coil for improved transient response and an aluminum dome 1″ neodymium motor compression driver mounted on a 70 horizontal by 70 vertical low distortion waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch.Finished in a highly durable semi-matte black paint, the cabinet is constructed from 15 mm (58″) birch plywood, and includes a rugged powder-coated perforated steel mesh grille backed with reticulated foam. The TVX152 includes internal M10 threaded rigging points for permanent installation, a dual-angle pole mount socket for high or low height use with 35 mm poles/speaker stands to optimise audience coverage, and durable handles for easy transport. Two Neutrik speakON* NL4 connectors are provided for input and link connections to additional enclosures.Speaker configurationActive/passive:PassiveType:Full-rangeLF driver:15″MF driver:Not applicableHF driver:1″Power capacity8 Ohms program/peak:500W/2000W4 Ohms program/peak:AudioFrequency response:60Hz – 20kHzCoverage pattern:70 x 70Max SPL:130 dBInputsXLR:Not applicableTRS:Not applicableTS:Not applicableRCA:Not applicableSPEAKON:1Output/thruXLR:Not applicableTRS:Not applicableTS:Not applicableRCA:Not applicableSPEAKON:1EnclosureCabinet material:15mm plyWidth:17″Height:27.6″Depth:18.5″Weight:58.1 lb.
Turbosound, Powered PA Speakers TVX152

Turbosound Iq8 2-Way 8″ Powered …

Turbosound Iq8 2-Way 8Turbosound – Turbosound Iq8 2-Way 8″ Powered Loudspeaker
The 2,500-Watt iQ8 is a powered two-way loudspeaker suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 8″ low frequency driver with a low mass voice coil for improved transient response and a high-temperature 1″ compression driver with copper clad aluminum voice coil for extended high frequency reproduction. Equipped with an efficient and lightweight two-channel KLARK TEKNIK Class-D power amplifier, the iQ8 provides an impressive 2500 watts of output power. A high degree of control over the loudspeaker systems performance is managed by a sophisticated but easy-to-use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels. iQ8s advanced DSP speaker modeling presets include detailed and accurate models of some of the audio industrys most-respected loudspeakers. KLARK TEKNIK also developed a versatile Spatial Contour Control (SCC) DSP function, which allows the user to optimize the iQ8s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors. On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modeling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ8 features a mic/line switch and level control with signal present LED on each channel. The iQ8 also features Turbosounds proprietary ULTRANET technology,Speaker configurationActive/passive:ActiveType:Full-rangeLF driver:8″MF driver:N/AHF driver:1″PowerAmplifier class:DWattage:2500W Mixer/preamp:N/AAudioFrequency response:60Hz – 18kHzCoverage pattern:90 x 60Max SPL:128 dBInputsXLR:2 x XLR/TRS comboTRS:N/ATS:N/ARCA:N/AOutput/thruXLR:2TRS:Not applicableTS:Not applicableRCA:Not applicableEnclosureCabinet material:PolypropeleneWidth:11″Height:18″Depth:11″Weight:32 lb.
Turbosound, Powered PA Speakers IQ8

Turbosound Nuq82 2-Way 8″ Full Range …

Turbosound Nuq82 2-Way 8Turbosound – Turbosound Nuq82 2-Way 8″ Full Range Loudspeaker
The two-way full range NuQ82 is a switchable passive/bi-amp 1,000 Watt 8″ loudspeaker system ideally suited for a wide range of speech and music sound reinforcement applications. Engineered to work in conjunction with TURBOSOUND loudspeaker management systems, the NuQ82 provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. The NuQ82 loudspeaker features an 8″ low frequency driver with a low mass voice coil for improved transient response, and an aluminum dome 1″ neodymium high frequency compression driver mounted on a rotatable 100 horizontal by 60 vertical dispersion converging elliptical waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. The rear panel connector plate carries Neutrik speakON* NL4 connectors for input and link connections to additional enclosures. Finished in a highly durable semi-matte black paint, the cabinet is constructed from 12 mm (“) birch plywood and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Multiple threaded rigging points are provided for suspension in any orientation, or for mounting with industry standard wall brackets. Optional flying yoke, swivel brackets, and swivel extenders allow for further flexibility in install applications (each available separately). The NuQ82 also features a 35 mm socket for standard pole mounting plus integrated handles for convenient transport.Switchable passive/bi-amp operation for flexibility of useRotatable converging elliptical waveguide provides 100 H x 60 V dispersion12 mm (1/2″) birch plywood enclosure with semi matt black paint finishRugged powder coated perforated steel mesh grilleIntegral 35 mm pole mount and handlesMultiple internal rigging points allow bracket mount and suspension NeutrikSpeaker configurationActive/passive:PassiveType:Full-rangeLF driver:8″MF driver:Not applicableHF driver:1” Titanium domePower capacity8 Ohms program/peak:250W Cont/1000W Peak4 Ohms program/peak:AudioFrequency response:50Hz – 20kHz +3dBCoverage pattern:100 x 60Max SPL:117 dB contInputsTRS:Not applicableTS:Not applicableRCA:Not applicableSPEAKON:1Output/thruTRS:Not applicableTS:Not applicableRCA:Not applicableSPEAKON:1EnclosureCabinet material:15 mm birch plyWidth:10.7″Height:18.3″Depth:8.7″Weight:22.4 lb.
Turbosound, Powered PA Speakers NUQ82

Turbosound Iq15 15 Inch Powered …

Turbosound Iq15 15 Inch Powered  ...Turbosound – Turbosound Iq15 15 Inch Powered Loudspeaker
The iQ15 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes a 15″ low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1″ compression driver with copper-clad aluminum voice coil for extended high frequency reproduction. Equipped with an efficient and lightweight two-channel KLARK TEKNIK Class-D power amplifier, the iQ15 provides an impressive 2500 Watts of peak output power. A high degree of control over the loudspeaker systems performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels as well as for long-term reliability. The iQ15s advanced DSP speaker modeling presets include accurate models of some of the audio industrys most-respected loudspeakers. KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to optimize the iQ15s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors. On the rear panel amplifier module, you will find a user interface consisting of an LCD display, Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modeling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ15 features a mic/line switch and level control with signal present LED on each channel. The iQ15 also features Turbosounds propriSpeaker configurationActive/passive:ActiveType:SubwooferLF driver:15″MF driver:N/AHF driver:1″PowerAmplifier class:DWattage:2500W peakMixer/preamp:N/AAudioFrequency response:42Hz – 20 kHzCoverage pattern:75 x 55Max SPL:132 dBInputsXLR:2 x XLR/TRSTRS:TS:RCA:Output/thruXLR:2 from input, 1 mixTRS:TS: RCA:SPEAKON: EnclosureCabinet material:PolypropeleneWidth:17.7″Height:28″Depth:15″Weight:57 lb.
Turbosound, Powered PA Speakers IQ15

Turbosound Siena Tsp118b-An 18″ Powered …

Turbosound Siena Tsp118b-An 18Turbosound – Turbosound Siena Tsp118b-An 18″ Powered Subwoofer
The Siena 3000 Watt TSP118B-AN is a powered 18″ front-loaded, bass reflex subwoofer enclosure that is optimally tuned for extended low frequency response. Designed to work individually without a controller, the TSP118B-AN provides very high output FOH performance and is ideally suited for a wide range of music and live sound reinforcement applications.Custom-Engineered DriversTURBOSOUND is recognized the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by using only drivers designed specifically for each application its what sets us apart from the competition. The TSP118B-AN features a powerful 18″ low frequency driver that uses a special inside/ outside wound voice coil for higher magnetic density, better heat dissipation, high power handling capacity, and improved efficiency. For its size and operating bandwidth, the TSP118B-AN delivers extremely high output that is virtually distortion-free for world-class low frequency performance that will stand the test of time.Class-D Massive Power, Perfect SoundEquipped with a very efficient and lightweight KLARK TEKNIK Class-D power amplifier, the TSP118B-AN provides an impressive 3000 watts of output power in a highly portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and large heat sinks.Onboard DSPA high degree of control over the loudspeaker systems performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels and long-term reliability.Intuitive User InterfaceOn the rear panel amplifier module, you will find a fully featureSpeaker configurationActive/passive:ActiveType:SubwooferLF driver:18″MF driver:N/AHF driver:N/APowerAmplifier class:DWattage:3000WMixer/preamp:N/AAudioFrequency response:35hZ – 90Hz +3dBCoverage pattern:N/AMax SPL:134 dB peakInputsXLR:1 XLR/TRS comboTRS:N/ATS:N/ARCA:N/AOutput/thruXLR:1TRS:N/ATS:N/ARCA:N/AEnclosureCabinet material:18 mm birch plyWidth:20.6″Height:27.3″Depth:28.5″Weight:61.2 lb.
Turbosound, Powered Stage Subwoofers TSP118BAN

Turbosound Inspire Ip1000 Powered Column …

Turbosound Inspire Ip1000 Powered Column  ...Turbosound – Turbosound Inspire Ip1000 Powered Column Loudspeaker
Although called a column loudspeaker, the INSPIRE iP1000 delivers the powerful, high-quality sound and optimized dispersion inspired by Turbosounds line array products, butin a surprisingly lightweight and easy to use, all-in-one form factor. Thanks to an onboard three-channel digital mixer and multichannel 1,000-Watt Class-D amplifier driving a custom-engineered dual 8″ subwoofer, 8 x 2.75″ neodymium drivers and a horn loaded super tweeter, the iP1000 is ideally-suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs and much more. The iP1000 is lightweight and features industry-leading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifier and Spatial Sound technologies plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control. Tiny PA 1,000 Watts of Perfect SoundDesigned for maximum portability, iP1000s column fits neatly into the shoulder bag (available separately), and setup is fast and easy; just attach the column to the base and connect your mic, or mixer feed and power. Three channels of revolutionary Class-D amplifier technology provides 1,000 Watts of sonic performance in an easy-to-use, ultra-portable and lightweight package. This amazing technology makes it possible to design and build extremely powerful products that are lighter in weight than their traditional counterparts while using less energy and protecting the environment. The lightweight Switch Mode Power Supply, coupled with an industry-leading DSP module, provides dynamic equalization and sophisticated limiting functions to ensure optimal performance and long-term reliabilityOutstanding Sound DispersionMuch like the huge line array systems youve experienced at concerts and outdoor festivals, the 2.75″ neodymium midrange / extended high-frequency drivers in the iP1000 columns are strategically placed to provide up to a 120 horizontal dispersKLARK TEKNIK’s SST (Spatial Sound Technology) for 3D acoustic environmentsWide sound dispersion provides consistent sound to the audience and performersThree-channel digital mixer with gain setting recallComprehensive remote control via Apple iPhone/iPad*High quality Bluetooth* stereo audio streamingDSP presets for application type and speaker positioningIntuitive single rotary control user interface with LCD display for ease of navigationHorn loaded super-tweeter extends high frequency range and throwPrecision-lock, aluminum array system eliminates speaker stands and cablesRoadworthy birch plywood enclosure with semi-matte black paint finishRugged powder coated perforated steel mesh grilleIntegral ergonomic carrying handles for ease of portability
Turbosound, Powered PA Speakers IP1000