Tag Archives: B-52

B-52 Comp-4Cls 1″ Exit Compression Driver …

B-52 Comp-4Cls 1B-52 – B-52 Comp-4Cls 1″ Exit Compression Driver &Mdash Screw-On
The COMP-4CLS is a 1″ Exit Compression Driver that features a titanium diaphragm and is mounted with screws. The voice coil diameter is 1.75″. This compression driver is built to engineering perfection using the most innovative design concepts and materials. B-52 transducers are manufactured to maximum tolerances by some of the most well-respected engineers in the world. All loudspeakers are subjected to a wide array of quality-assurance tests during and post assembly. It’s for these reasons that B-52 speakers typically have a 0.2% return rate and are backed by a five-year warranty.Replacement Compression DriverScrew mounted
B-52, Replacement PA Speakers B-52 COMP-4CLS

B-52 Lx-1515V3 1000W Dual 15″ Pa …

B-52 Lx-1515V3 1000W Dual 15B-52 – B-52 Lx-1515V3 1000W Dual 15″ Pa Speaker
The B-52 LX-1515V3 1000W Dual 15″ PA Speaker is a full-range system featuring a quasi 3-way design. The LX-15153 has a sophisticated tapered array crossover network which directs low frequencies to both 15″ speakers while limiting the midrange to only the top woofer. The result is improved low-end and clearer sound in the high frequency range. The PA speaker’s ultra-efficient compression driver, mounted to a custom elliptical waveguide, delivers smooth mids and vivid highs that won’t fatigue your ears.Comp-4CLB compression driverThe B-52 LX-1515V3 uses the COMP-4CLB 1″ exit PETP film diaphragm compression driver, providing smooth mids and extended high-frequency reproduction.Elliptical wave guideWave GuideB-52’s new elliptical waveguide perfectly complements the COMP-4CLB compression driver. The coverage is uniform over more than 3 octaves and the overall response is smooth and extended. The asymmetrical shape allows close physical coupling to the woofer and a slight tilt of the sound down to the listening level.Advanced CrossoverThe B-52 LX-1515V3 has an advanced tapered array crossover network design that1000-watt full-range systemQuasi 3-way design with a sophisticated tapered array crossover networkDual 15″ speakers1″ COMP-4CLB exit PETP film diaphragm compression driverElliptical waveguide perfectly complements the COMP-4CLB compression driverAdvanced tapered array crossover networkFitted with metal bar handles, protective metal corners, and rubber feet
B-52, Unpowered PA Speakers LX-1515V3

B-52 Atx-100 100W Tube Guitar Amp Head …

B-52 Atx-100 100W Tube Guitar Amp Head  ...B-52 – B-52 Atx-100 100W Tube Guitar Amp Head Black
The B-52 ATX-100 tube amp head is perfect for guitarists of every level. Whether you are playing to a stadium crowd of 50,000 or practicing at home in your garage, the ATX will produce awesome crunch, smooth mids, and crystal-clear highs. The B-52 ATX-100 has a 100% pure all-tube signal path, incredible tone, and an array of friendly features. It combines the superb tone and punch of a matched quartet of Sovtek 5881 power tubes with specially selected 12AX7 preamp tubes for solid tube tone and reliability. This roadworthy amp head provides the serious musician with monstrous gain, an extreme range of tone options and a sparkling clean channel. The three-channel B-52 ATX will take you from shimmering cleans with just the right touch of its lush spring reverb, to an all-out metal assault. The clean channel is designed to stay clean all the way up unless you push the master volume to get that nice warm power tube break-up. The clean channel features a volume, responsive 3-band EQ as well as a bright switch. The B-52 head’s overdrive section features 2 channels with separate volume and gain controls that share a 3-band EQ. The newly designed mid-cut feature is assignable to either of the overdrive channels giving you the ability for a brutal rhythm channel and a searing lead tone. All channels share a master volume, low-res (resonance) and reverb control.All-tube signal pathOverdrive channel: gain 1 and gain 2 each with independent master volumes, 3-band EQ, assignable mid-cut controlClean channel: master volume, 3-band EQ and bright switchGlobal controls: volume, low-res (resonance) and reverbEffects loop (footswitchable)Selectable 4 / 8 / 16 Ohms external speaker jacks4-position footswitch: channel, gain, reverb and effects loopChrome-plated front and rear panelsFeatures rock-solid 13-ply Baltic birch construction
B-52, Tube Guitar Amplifier Heads ATX-100

B-52 Lx-18Ev3 1000W Folded …

B-52 Lx-18Ev3 1000W Folded  ...B-52 – B-52 Lx-18Ev3 1000W Folded Subwoofer
The powerful 1000W B-52 LX-18EV3 Folded Subwoofer delivers intense long-throw bass while remaining a mobile and extremely affordable speaker. The LX18EV3 is ideal for live sound and music replay applications. The LX-18EV3 features the B-52 18-220X subwoofer. The cabinet, made in the US, features 7-layer 3/4″ plywood construction, reinforced internal bracings, and is finished with impact forgiving black carpet and 4″ heavy-duty casters.The speaker’s 18″ subwoofers are housed in a compression chamber that minimizes the excursion of the driver while maximizing the subwoofers’ output. The optimally-sized acoustic aperture of the compression chambers forms the throat of the horn and helps force the air at an increased velocity and pressure. The LX-18EV3 subwoofer’s compression chamber optimizes the horn’s output, allowing for amazing output levels.All B-52 folded-horn cabinets are loaded with the new B-52 18-220X subwoofer which provides high-power handling, great efficiency, very low distortion, and accurate sound reproduction. Key features include:4-inch “inside/outside” voice coil wound on both sides of the glass fiber coil former, providing moreMade in the U.S.A.Rugged, impact-resistant black carpet finishVoid-free, 7-layer, ” plywood construction for maximum durability and minimum weightInput connections: (2) ” metal phone jacks and (1) Neutrik NL 4 Speakon connectorReinforced internal bracings are used to fortify the cabinet4″ heavy-duty castersPole-mounting cup
B-52, Unpowered Stage Subwoofers B-52 LX-18EV3