Tag Archives: Applied Microphone Technology

Applied Microphone Technology Amt Ta2 Double …

Applied Microphone Technology Amt Ta2 Double  ...Applied Microphone Technology – Applied Microphone Technology Amt Ta2 Double Soprano Saxophone Microphone With Bp45
The AMT TA2 is a low profile double condenser microphone that attaches to the bell with a low mass clip specifically designed soprano or baritone saxophone. The microphone provides pure tonal reproduction while being unobtrusive. The TA2 is an excellent choice for a principal artist or soloist.The first microphone attaches to the bell of the saxaphone, the second or over-the-keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. Both microphones are on goosenecks for optimal placement. It’s rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The AMT TA2 mic is terminated by a 3.5mm plug which connects to a belt pack preamp. The output is a pre-determined mix balanced at AMT’s state of the art facility. The engineers choose the balance by the natural sound of the instrument. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriately. A low Z cable and case is included.Requires phantom power.AMT TA2 Double MicrophoneBelt pack Preamp1/4 to XLR CableHard shell Blo-mold protective case
Applied Microphone Technology, Instrument Wireless Systems AMT TA 2

Applied Microphone Technology Amt Ws Studio …

Applied Microphone Technology Amt Ws Studio  ...Applied Microphone Technology – Applied Microphone Technology Amt Ws Studio Double Clarinet/Oboe Microphone With Ap40 Preamp
The AMT WS Studio version combines the AMT WS Clip-On Double Microphone system with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends signal at Mic Level. The AMT WS is a low profile double condenser microphone system that attaches to the clarinet, alto and bass flute, or oboe with a ultra-miniature low mass clamp. It is specifically designed for the timbre of the clarinet. The microphone provides pure tonal reproduction while being unobtrusive. It has an even reproduction of sound across the entire instrument. The AMT WS features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It’s rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight2 AMT WS condenser MicrophonesFlexible GooseneckAMT AP40 Floor Pre-ampHard shell protective case
Applied Microphone Technology, Condenser Microphones AMT WS Studio

Applied Microphone Technology Clip-On Mic …

Applied Microphone Technology Clip-On Mic  ...Applied Microphone Technology – Applied Microphone Technology Clip-On Mic For Sennheiser Systems
The AMT LS is Applied Microphone Technology’s flagship woodwind microphone system. Designed, manufactured by hand, and distributed by AMT in the USA. The system is intended to clip onto flanged bell instruments. The LS is AMT’s first choice recommendation for the Tenor and Alto Saxophonist and Baritone saxophone players performing in a horn section.The most natural sound reproduction possible from a clip on microphone. All versions of the LS now include updated features including D.C.T. (Disconnect Cable Technology) with the ability to connect the Wi5IIC creating a belt pack free wireless system.The latest LS updates allow the player to easily change to and from AMT’s different preamps while also allowing for direct connections to the Wi5IIC, Shure, Sabine, Line 6 or Sennheiser wireless systems. With a change in a cable, convert your LSi, LS or LS Studio from a wired belt pack / DI style preamp over to a wireless setup quickly and easily or choose the LSW which ships without a preamp and includes the cable ready for the chosen wireless. Cables sold separately.The LS in it’s stock configuration is the perfect choice for the player that needs a hard wired (non wireless) belt pack style setup. The LS is available in five packages. (LSi, LS, LS Studio, LSW – AMT / Shure / Sabine / Line 6, LSW – AMT / Sennheiser) All of the microphones are identical and all can also be used wirelessly or with the included preamp wired if chosen.Choose the version by determining if you want a wired, wireless, or require the need for both.The AMT LS is an excellent choice for soft to loud music for a principal artist, ensemble setting, or as a soloist. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 1 AA battery required for hardwired / beltpack with the BP45. Phantom power required for use with the LSi – Inline Preamp package. Phantom power or 9 volt battery required for the Studio packaClip-On Condenser Microphone for a woodwind or brass instrument”Off the bell” clamping systemConverts from an “Belt pack” model, to a LS “W”ireless setup or AMT Studio setupIncludes soft case and cables
Applied Microphone Technology, Wireless System Components AMT LSW – Sennheiser

Applied Microphone Technology Amt Ta2w Dbl …

Applied Microphone Technology Amt Ta2w Dbl  ...Applied Microphone Technology – Applied Microphone Technology Amt Ta2w Dbl Soprano Saxophone Microphone W/Cable For Amt, Shure, Sabine & Line6 Wireless Systems
The AMT TA2W – Shure is a low profile double condenser microphone System designed to work with Shure Wireless Systems. The first microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are on goosenecks for optimal placement. It’s rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The AMT interface lets the artist use AMT microphones with most Shure wireless transmitters. In most cases the Interface will eliminate the beltpack that has come with your microphone system. The AMT Interface will replace the belt pack and can be fastened using velcro to the belt pack of whichever wireless system that you are using. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. Requires phantom power.
Applied Microphone Technology, Wireless System Components AMT TA2W – Shure

Applied Microphone Technology Amt Z1 Flute …

Applied Microphone Technology Amt Z1 Flute  ...Applied Microphone Technology – Applied Microphone Technology Amt Z1 Flute Microphone With Bp45 Preamp
The AMT Z1 is a hardwired single microphone made for flute. The Z1 mic is the perfect choice from soft to louder playing applications. It can be used for featured soloist to miking a section of flutes. The AMT Z1 single microphone gets the most gain before feedback. The system comes with the microphone, special low mass flute clamp and preamp. The preamp uses the chip technology which contours the microphone for the most natural reproduction of sound possible. Perfect for all situations.Requires phantom power.AMT Z1 MicrophoneBelt-pack Preamp1/4 to XLR CableHard shell Blo-mold protective case
Applied Microphone Technology, Instrument Wireless Systems AMT Z1

Applied Microphone Technology Amt Wsw Double …

Applied Microphone Technology Amt Wsw Double  ...Applied Microphone Technology – Applied Microphone Technology Amt Wsw Double Clarinet Microphone With Cable For Amt, Shure, Sabine, & Line 6 Wireless Systems
The AMT WSW – Shure is a special version of the AMT WS. The microphone element remains with the same high level of quality that the WS achieves however is specially adapted to work with any Shure belt pack transmitter/wireless system such as the ULXS14 or ULXP14. The WS comes wired directly with a 4 pin connector to connect directly to any Shure wireless belt pack.The WS is a low profile double condenser microphone that attaches to the clarinet, alto and bass flute, or oboe with a ultra-miniature low mass clamp. It is specifically designed for the timbre of the clarinet. The microphone provides pure tonal reproduction while being unobtrusive. It has an even reproduction of sound across the entire instrument. The AMT WS features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It’s rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive. The WSW features one microphone at the bell and second positioned over the keys to provide a truer reproduction for the musical instrument’s tone quality. The AMT WSW mic also comes with two isolation rings. Both microphones are suspended in AMT’s iso-ring technology which allows more gain before feedback and less handling noise. A low Z cable and case is included.Requires phantom power.Dual AMT WS MicrophonesFlexible Gooseneck4 pin connector for Shure TransmittersSoft carrying AMT pouch for microphone
Applied Microphone Technology, Wireless System Components AMT WS – Shure

Applied Microphone Technology Amt M40 …

Applied Microphone Technology Amt M40  ...Applied Microphone Technology – Applied Microphone Technology Amt M40 Acoustic Piano Microphone System With Ap40 Preamp
The AMT M40 is Applied Microphone Technology’s legendary piano microphone system. Designed, manufactured by hand, and distributed by AMT in the USA. The system is intended to set inside the piano normally between the 2nd and 3rd sound holes on the cast iron plate of a grand and fastened to the front bottom door of an upright piano.The M40 achieves the most natural sound possible out of a microphone. Mono in design, the system can be used with a flat EQ setting allowing plenty of gain before feedback all while maintaining the pure and natural sound that each different piano has. Applied Microphone Technology designs microphone specific for each instrument and does not adapt one microphone for many instruments.The M40 is a bold new direction for microphones incorporating integrated circuit technology. The M40 has been designed for piano but works equally well in other applications such as boundary layer micing (conference, stage).The system allows the microphone to be used with the piano lid closed. Cumbersome microphone stands not needed, as the system is very compact with many possible placements. The M40 is the only system on the market that will allow a close-lid application successfully. It is capable of picking up subtle passages as well as sound pressure levels up to 141dB.The M40’s rugged construction of anodized aviation aluminum allows it to withstand high impact while being lightweight and non-corrosive. The signal from the AP40 or AP41 preamp can be split with frequencies rolled off in a specific way to create a stereo image.The M40 terminates to the AP40 (Studio) aluminum pre-amp with chip technology, which can be powered by phantom power or 9 volt battery. Comes with hard shell case.The M40P terminates to the AP41 aluminum pre-amp which includes a transformer and a external power supply. (110 Power supply included)”Natural soundGreat for live or studioRejects feedbackBroad dynamic response
Applied Microphone Technology, Condenser Microphones AMT M40

Applied Microphone Technology Amt S15g …

Applied Microphone Technology Amt S15g  ...Applied Microphone Technology – Applied Microphone Technology Amt S15g Studio Acoustic Guitar Microphone With Ap40 Preamp And Side Mounting
The AMT S15G Studio version combines the AMT S15G cardioid guitar microphone system with the AMT AP40 floor preamp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary is on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with the achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR low-impedance balanced outputThe S15G comes with a cable that disconnects as well. This cable will allow the player to switch back and forth between the different AMT preamps as well as convert it to the “Wireless” setup. (Different cables and preamps sold separately)The AMT S15G Studio version is meant to be used either in a studio setting where close miking of an instrument is desired or in a professional level setting where the “Sound Engineer” controls the microphone.Requires phantom power.AMT AP40 floor preamp1/4 – XLR CableFlexible 6″ GooseneckHard Shell Blo-Mold Protective CaseOperates On Either 9 Volt Battery Or Phantom PowerGround Lift switchWireless AbilityRugged Construction Of Anodized Aviation Aluminum
Applied Microphone Technology, Condenser Microphones AMT S15G Studio