Archiv der Kategorie: Licht Zubehör

Contest Contestage Tot-200

Contest Contestage Tot-200Contest Contestage Tot-200 Contest
Totem – Height: 200 cm4 x Tubes, 2 x Baseplates, 2 x Connection kits and 1 x Lycra fabricISO DIN 4113 and TUV certified.Made of 50mm aluminium alloy (EN AW 6082 T6, diameter 50 mm, thickness 2 mm). The Totems are supplied with a 50 mm aluminium pipes and a Lycra fabric.You can show your projectors off placing another projector inside the totem without any unwanted shadow. Supplied with :- 4 x 50mm Tubes- 2 x Baseplates- 2 x Connection kits- 1 x Lycra fabric- Height: 200 cm
Beleuchtung, Licht Zubehör, Strukturen und Lichtstative, Strukturen

Contest Contestage Ag29-042

Contest Contestage Ag29-042Contest Contestage Ag29-042 Contest
290 mm Tee – 4 directions – Low vertexISO DIN 4113 and TÜV certified. Made of 50mm aluminium alloy (EN AW 6082 T6, diameter 50 mm, thickness 2 mm) . The conical connectors and pins allow you to set it up quickly, and guarantee a very safe, stable and resistant installation. Disassembling it is also very quick.• 50mm tubes• 16mm braces• Distance between each tube : 240 mm• Can be assembled with conical connectors and pins• Width: 290 mm• Max dimensions: 500mm x 710mm• Use: Horizontal Tee corner joint + vertical pole• 4-direction Tee
Beleuchtung, Licht Zubehör, Strukturen und Lichtstative, Strukturen

Contest Contestage Agqua-06

Contest Contestage Agqua-06Contest Contestage Agqua-06 Contest
Quatro angle – 90´ – 4 directionsISO DIN 4113 and TUV certified. Made of 50mm aluminium alloy (EN AW 6082 T6, diameter 50 mm, thickness 2 mm). Square structure allowing heavier loads, with conical connectors.- 50mm tubes- 16mm braces- Distance between each tube : 240 mm- Can be assembled with conical connectors and pins- Angle – 4 directions: 90´- Dimensions (max) : 71 cm x 71 cm
Beleuchtung, Licht Zubehör, Strukturen und Lichtstative, Strukturen

Contest Contestage Plts-2×1

Contest Contestage Plts-2x1Contest Contestage Plts-2×1 Contest
2m x 1m antislip 750Kg/m² * platform – blackDelivered without feetATTENTION !In accordance with the standard NFE85-015: – Maximum height of 150cm is allowed – A handrail should be installed if the height to climb is more than 50cm.These provisions are not exhaustive. For other regulations, check the standard mentioned above.ATTENTION TO THE SOIL CAPACITYA loose ground can harm the safety of the installation.Please distribute the weights uniformly over the entire surface of the platform.ABOUT HANDRAILS & STAIRSA handrail must be installed as soon as the drop height is more than 50cm.A stair lower or equal to 120 cm must have at least one handrail.FIRE RESISTANCEFire resistance class Bfl-S1It complies with European standard EN13501-1 + A1: 2010750 kg /m² distributed over the whole surfaceof the platform with square feet up to 150 cm- Material : – Frame: Aluminium – Platform : 12mm plywood- Size : 2 m x 1 m- Thickness : 90 mm- Load bearing capacity : 750 Kg/m²- Finishing : Black- Weight : 30 Kg
Beleuchtung, Licht Zubehör, Strukturen und Lichtstative, Strukturen

Contest Contestage Elv-270pro

Contest Contestage Elv-270proContest Contestage Elv-270pro Contest
Self-locking winch elevator legsISO DIN 4113 and TÜV certified. The Ø 35 mm pipe allows you to mount speakers, or use it for lighting stands if you add an horizontal truss (not supplied).This high-quality self-locking winch elevator legs was made in Europe.The double leg reinforcements and the three robust legs ensure a great stability.The clamping knob perfectly locks the tubes.• Certification : TÜV-approved• Material : Hardened steel• Finishing : Galvanized (grey) or epoxy paint (black)• Tube diameter : Ø 35 mm• Winch : Anti-reverse self-locking gear• Cable : Galvanized steel• Max load (kg): 60• Max height (m): 2,70• Folded length (m): 1,60• Weight(kg): 12• Galvanized steel cable (mm): Ø 3
Beleuchtung, Licht Zubehör, Strukturen und Lichtstative, Lichtstative